SurgeX SX-2120 // Programmable Sequencer Surge Eliminator

$ 749.00

SurgeX SX-2120 // Programmable Sequencer Surge Eliminator

$ 749.00

Program, sequence, protect, and condition your system's power.

SurgeX Sequencers provide the sequencing parameters, conditioning, shutdown thresholds, and surge protection needed to safeguard audio, video, broadcast, and computer equipment. These units have robust management features and are extremely easy to install, program, and use. They include two always-on receptacles and four programmable banks. The SEQ models feature one “virtual” bank for controlling remote units, allowing for infinitely expanding distribution schemes. The SEQ also includes an LCD screen.

They are engineered with Advanced Series Mode® surge elimination technology to provide top-of-the-line protection. Superior to conventional MOV circuitry or MOV-Hybrid designs, they completely eliminate surge energy up to 6,000 volts without producing harmful side effects such as ground contamination or common-mode disturbances. Completely non-sacrificial and never needing reset, they provide the most reliable protection available. Our Sequencers also feature both common mode and normal mode impedance tolerant EMI/RFI filtering, SurgeX ICE (Inrush current elimination), and CouVS (Catastrophic over/under Voltage shutdown) for a complete power conditioning solution.

  • Free shipping on all orders.
In Stock
Free 2 Day Air Shipping
SKU: SX-2120
Categories: Power
Brand: Surgex

SurgeX Sequencers provide the sequencing parameters, conditioning, shutdown thresholds, and surge protection needed to safeguard audio, video, broadcast, and computer equipment. These units have enhanced management features and are extremely easy to install, program, and use.

They include two always-on receptacles and four programmable banks. The SEQ models feature one “virtual” bank for controlling remote units, allowing for infinitely expanding distribution schemes. The SEQ also includes an LCD screen.

  • Advanced Series Mode surge protection
  • Three sequenced banks of four receptacles; two always-on receptacles
  • Setup stored in nonvolatile memory
  • Impedance Tolerant EMI/RFI filtering
  • Over/Under Voltage Shutdown
  • Inrush Current Elimination
  • Can be used to control other SurgeX products or daisy-chained with other SEQ sequencers (SEQ)
  • LCD screen (SEQ)

Specifications

SEQ

SEQ-1U

SX-2120

Load Rating
20 amps @ 120 volts20 amps @ 120 volts20 amps @ 120 volts
Maximum Load Inrush Energy1400 Joules total during power-up1400 Joules total during power-up1400 Joules total during power-up
Surge Let-Through Voltage
(6000-volt surge)
0 volts0 volts0 volts
UL 1449 Adjunct Classification
Test Results
1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts;
no failures
1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts;
no failures
1000 surges, 6000 volts, 3000 amps, B3 pulse; Measured suppressed voltage: 170 volts;
no failures
Federal GuidelinesGrade A, Class 1, Mode 1
(CID A-A-55818)
Grade A, Class 1, Mode 1
(CID A-A-55818)
Grade A, Class 1, Mode 1
(CID A-A-55818)
EMI/RFI Filter, Normal Mode
(50-ohm load)
> 30 dB 100 KHz – 50 MHz> 30 dB 100 KHz – 50 MHz> 30 dB 100 KHz – 50 MHz
EMI/RFI Filter, Common Mode
(50-ohm load)
> 20 dB 1 MHz – 50 MHz> 20 dB 1 MHz – 50 MHz> 20 dB 1 MHz – 50 MHz
Under-Voltage Auto ShutdownAdjustable from 90V to 110VAdjustable from 90V to 110VAdjustable from 90V to 110V
Over-Voltage Auto ShutdownAdjustable from 130V to 150VAdjustable from 130V to 150VAdjustable from 130V to 150V
Maximum Applied Surge Voltage6000 volts*6000 volts*6000 volts*
Maximum Applied Surge CurrentUnlimited, due to current limiting*Unlimited, due to current limiting*Unlimited, due to current limiting*
Maximum Applied Surge EnergyUnlimited, due to current limiting*Unlimited, due to current limiting*Unlimited, due to current limiting*
Endurance
(C62.41-1991 Category B3 pulses)
1 kV>500,000; 3 kV>10,000;
6 kV>1000
1 kV>500,000; 3 kV>10,000;
6 kV>1000
1 kV>500,000; 3 kV>10,000;
6 kV>1000
Control InputsMomentary Switch, Latching Switch, Contact Closure or 5-30 VdcMomentary Switch, Latching Switch,Contact Closure or 5-30 VdcMomentary Switch, Latching Switch, Contact Closure or 5-30 Vdc
Input Control Current3 mA3 mA3 mA
DC Voltage Output12 Vdc, 40 mA maximum load12 Vdc, 40 mA maximum load12 Vdc, 40 mA maximum load
Auxiliary Relay Contact Rating30V DC at 1A30V DC at 1A30V DC at 1A
Contact Closure Max Resistance40 mA40 mA40 mA
12V DC Output Max Current100 Ω100 Ω100 Ω
Delay Times1 – 40 seconds in 1 second increments1 – 40 seconds in 1 second increments1 – 40 seconds in 1 second increments
Dimensions3.5″ H x 19.0″ W x 10.5″ D
(8.9 x 48.3 x 26.7 cm)
1.75″ H x 19.0″ W x 12.25″ D
(4.4 x 48.3 x 31.0 cm)
3.5″ H x 19.0″ W x 10.5″ D
(8.9 x 48.3 x 26.7 cm)
Weight16 lbs (7.3 kg)13 lbs (5.9 kg)16 lbs (7.3 kg)
Temperature Range5º to 35º C5º to 35º C5º to 35º C
Humidity Range5% to 95% R.H., non-condensing5% to 95% R.H., non-condensing5% to 95% R.H., non-condensing
Agency ListingsUL 1449 3rd Edition
UL 1283 5th Edition
CSA C22.2 No.8-M1986 (R2008)
UL 1449 3rd Edition (Pending)
UL 1283 5th Edition (Pending)
CSA C22.2 No.8-M1986 (R2008) (Pending)
UL 1449 3rd Edition
UL 1283 5th Edition
CSA C22.2 No.8-M1986 (R2008)
*1.2 x 50 μs pulse, industry standard combination wave surge, as per IEEE C62.41CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more between the electrical outlet and the electrical service panel.

Reviews

There are no reviews yet.

Be the first to review “SurgeX SX-2120 // Programmable Sequencer Surge Eliminator”